Preparation:
Try it first, with one of our 100 ml sample tins! Timber preparation: For raw timber • Surface must be properly sanded, Finish sanding with 120 Screen, the surface must be grease-free, dust-free, clean and dry.
• Different Timber species may give a different finish, please do a sample board if necessary.
• Repair holes and cracks with Redifill Wood Filler. Surface Preparation as a maintenance coat: Clean and vacuum thoroughly.
Application:
Application for raw untreated timber:
- Stir and shake well.
- With a roller, wet-on-wet, repeat rolling until the entire surface remains wet and the wood no longer absorbs oil (up to 60 minutes depending on the type of wood).
- Remove excess oil with a trowel or rubber blade and immediately buff in with a white PAD (Ø 400 mm) until there are no residues. There must be no shiny patches or oil splashes, it must appear dry. For hard to reach surfaces, use a lint-free cloth.
- For softer porous timbers, apply a thin coat using a slow speed buffer and white pad. Polish with a red pad after at least 12 hours drying time.
Maintenance of Existing surface:
1. Vacuum the floor toughly
2. Pour a small puddle on the floor no bigger than the palm of your hand.
3. Place the white pad on the buffing machine directly on the puddle.
4. Spread with a slow-speed rotary polisher and white pad
5. Buff the area until there is no evidence of swirl marks
6. With a lint-free cloth buff by hand around the floors’ perimeter.