The 3/4"(19mm) wide slot extrusion is used primarily as a miter fence slot; it can be built into any surface by dadoing a 1/2" x 1" groove to accept it. It is sized to allow a sliding fit with our 3/8" x 3/4" UHMW strips, as well as our 1/4 T-slot extrusion.
The inside walls have a slight chamfer at the top to guide pieces into the channel. The extrusion has a central V-groove for ease of drilling.
Made by Veritas®, these aluminum extrusions are anodised for wear resistance and to avoid oxidation. T-Track
Available in 2', 3', or 4' lengths.
Extrusions made in Canada, UHMW made in the USA.