800.521.11 - This set of router bits is designed for use in a router table, and provides all of the bits needed to create doors and drawer fronts, the panels to go into these, and the mechanical locking joint for solid timber drawers.
Please refer to the illustrations for complete profile and dimensions.
Tip: When using raised panel bits, rather than moving the router table constantly after each shallow pass, cut several 3mm shims of MDF or similar material to fit against the router table fence. This will limit the amount of material that can be removed in any one pass, and minimise the amount of fence adjustments needed.
Safety tips: the larger bits should be used between 10.000 and 12.000 RPM, three to five passes recommended. To be used with routers with at least 1700W (2-1/4 HP).