Woodpeckers Adjustable Setup Block Metric ADJSU-M-23

•  It’s just three steps to your precise dimension with the Adjustable Setup Block. Depress the quick-adjust button and slide the reference surface up or down until it’s close. Use the micro-adjust to dial in your exact dimension, then tighten the locking knob. It’s that easy.
• The “TOP” scale measures the distance from the bottom of the base to the top of the reference plate. You can use that to set the distance between the bottom of a drill bit and the table of your drill press.
• The “BOTTOM” scale measures the distance from the bottom of the base to the bottom face of the reference plate. It’s perfect for adjusting the height of a bit in your router table or the depth of cut on your table saw.
• The triangular base and reference plate are meticulously machined from a solid aluminium billet, then anodized with the famous “Woodpeckers Red” finish. Stainless steel inlays with an old-school jewelled finish provide a contrast.

A physical reference representing your critical dimension leads to more accurate machine setups than trying to adjust to a scale. Many woodworkers use sets of blocks for this task, but the Woodpeckers Adjustable Setup Block is one single device that adjusts to any dimension between 0.5mm and 25mm. Just use the easy-to-read scale to position the reference surface and dial in your cutter height or fence position. Use your sense of sight and touch to deliver the perfect settings. 

Note that some images serve as range illustrations and may not reflect the actual models and quantities. For an accurate depiction, see the first image on a white background.