-
Details
-
Specifications
-
Video & Downloads
DARE TO COMPARE?
This Deluxe, free-standing Phenolic Resin Router table features a SOLID Phenolic core, and a hard wearing and low friction surface laminate. This is not to be confused with MDF/Phenolic Table, that have a basic MDF substrate and thin Phenolic coating. Machined and exposed MDF, regradless of chemical treatment will be inferior to solid phenolic as it will be affected by moisture, humidity, dry, heat and other such damage. Phenolic resin is heavier, harder and, simply better (only to be out-classed by our own Cast Iron offering)
Pre milled, drilled and tapped to fit the Pro Router Stand, this kit includes the Carbatec "Lift N Lock" Universal Router Lift. The Pro Router Table Fence is manufactured from a single piece of aluminium extrusion and includes a 63mm dust port for efficient extraction from above the table, Micro adjusters and a flipstop. Also includes a remote mount NVR (No Volt Release), ON/OFF switch for your router.
The top and front feature T slots which allow the fitting of other jigs and accessories including the included transparent guard. The fence assembly also includes adjustable side scales for setting fence alignment and handy planing spacer bars for accurate edge trimming. The Carbatec Pro Stand features box section legs and bolted construction making it solid and stable. There is provision for storage of the included mitre gauge assembly.
A five piece set of router table inserts are available, with the standard insert having a 38mm inside diameter.
MOUNTING YOUR ROUTER: The Carbatec Router Lift is supplied pre-drilled to suit many different brands and model routers, but due to constantly evolving design, new model release and other manufacturer variations, we cannot guarantee a direct fit for all routers. You may be required to centre, countersink & drill the mounting plate to allow you to mount your chosen router.