EDGE RULE 900MM | Carbatec
My Store: Please select your store
Change Store
My Store: Please select your store
Change Store

Woodpeckers Edge Rule 900mm ERULE-900

Product Code: WP-ERULE-900

$84.90 inc GST
In Stock Low Stock Temporarily Out Of Stock Please See Attributes
Available for Immediate Delivery
Please select store
Increase value Decrease value
  • Hardware installation usually calls for a measurement referenced from an intersecting cross-member…like the rails and stiles of a cabinet face frame. The Edge Rule drops in perfectly zeroed out to the intersection and aligned to the stock.
  • Place the desired dimension at the end of your board and mark at the end of your Edge Rule on both the face and edge. Use the optional Edge Rule Stop to accurately and easily repeat that setting as many times as needed.
  • Even when you're not working at the edge of your stock, you'll still find the Edge Rule handy. The profiled shape makes it easier to move around on your stock than a thin, flat rule, and the bevelled edges get the scale right next to your stock where you need it.
  • The angle inside the Edge Rule is 89 °. This slightly acute angle puts the contact between your workpiece and the Edge Rule at the outside edges, which means slight deviations in your workpiece edge won't throw off your measurement.
  • Both edges are beveled, putting the scale right next to your work, which simplifies marking and minimizes parallax error. The Edge Rules are anodized for surface protection.
  • The graduated scale is laser engraved to an accuracy of ± .004” total accumulated error over the entire length.