Carbatec High Torque AA battery Clock Movement - 10mm Dial Thickness

• Hardware are included
• Length of threaded section of the spindle is 7/16 inch or 11.11mm
• For use on a board up to 10mm thick
• Total length of spindle is 7/8 inch or 22.23mm
• The shaft diameter is 5/16 inch (7.94mm) so use a 8mm drill

New "HT" series movements were designed specifically for use with larger hands. The distance between where the hour and minute hands are installed has been increased! This increased distance will help to prevent longer hands from binding and leaves enough room to accommodate the counterweights that are commonly used on large minute hands.