Incra Original Incra Jig

This is where it started, and the qualities and capabilities that made it so valuable in workshops then are still the same today. What makes the jig so simple, is what makes it so reliable as well, there are only two moving parts. These are the locking knob and the one piece upper carriage. The strong, glass reinforced resin body consists of upper and lower halves and provides 200mm of solid fence travel, making this the ideal fence system for any machine, not just a router table. It can be used for bandsaws, drill presses, in fact anywhere that needs a little accuracy.

The patented incremental racks are installed where the halves of the jig meet, with each rack offering hundreds of teeth on a precise spacing. Using this method of adjustment is 5 to 10 times more accurate than working visually by eye. When working with any machine, position the jig mounted to a board to either the centre or cutting edge of the cutter being used. From this reference point, accurate positioning can be achieved quickly and easily.

This is a Metric jig, for easy use and fine adjustment. Note, pictured with the optional fence system is not included.