Kustom High Speed Polish is a food grade low allergenic buffing/ polishing compound for use with any kind of buffing system, that can also be used as a friction polish.
Like the Kustom Grit range, it is available in two "steps", rated at #50'000 and #100'000 grit respectively, but unlike the Grit pastes in this case, is formulated into a hard set bar. The large bars are 200 grams each and represent the best bang for buck. They are the most appropriate size for applying to powered buffing wheels/buffing systems. Also available in a smaller bar, great for trying the product, or use as a friction polish or strop compound, as below.
Great for polishing virtually anything you want to polish on a buffing wheel - metals, timber, other hard finishes - anything you would normally use a buffing wheel for.
Additionally, Kustom High Speed Polish can be used as a "friction" polish, applied directly to lathe work. Apply by pressing the bar against your piece while running, or while off, draw on like a crayon, then use a fine cloth to melt and buff the finish while turning! Perfect for acrylic, resin or timber pens and many other projects. Leaves a long lasting and hard wearing high polish.
So versatile, it can also be applied to leather strops for honing your tools!
Colour coded labels assist in identifying the correct grit quickly: Red = Step 1; Blue = Step 2 and this is carried across other products in the Kustom Range.
TIP - the bar is cast with the Step 1 or 2 into the mould. Using it from the back and opposite end to the number means you will always know which bar to put in which box after use - right up until you need to replace it!
Kustom High Speed Polish Step 1 is rated at 50,000 grit and will achieve an exceptional level of polish. For further refining, Step 2 can be used after Step 1 for the ultimate results.
NB: Always wear eye protection while using powered buffing systems