The most versatile angle grinder accessory, Kutzall Shaping Wheels, will optimise your creative control.
Proudly crafted in the USA, they perform with remarkable wear life and provide a truly unique combination of superior material removal and surface quality. With effortless operation (with or against the grain) and resistance to loading, you'll use them project after project.
Their outstanding performance on a wide variety of materials will keep them locked in your favourite grinder. Wood, plastic, drywall, rubber, fibreglass, or soft stone, they will be your go-to workhorse for any task. NOTE: Should only be used on non-metallic materials.
Extreme Coating is best when heavy material removal is desired. Exceptionally resistant to loading, it is excellent for working with wet or gummy woods.
The Shaping Disc is semi-flat and allows you to effortlessly level high spots or adjust uneven surfaces. The structured teeth wrap over the outer diameter, allowing for edge-on detailing. Despite their relatively flat shape, their slight curvature allows for controlled, free-hand, flat or convex shaping.
Mounting Instructions: The Discs and Dish Wheels feature a 7/8" I.D. and are intended to mount on a standard electric angle grinder with a 5/8" shaft. They mount on the 7/8" shoulder found on the flange or adapter included with most angle grinders. The flange is put on the grinder first, then the wheel and the nut. *Metric Mounting: Use M14 Nut + 14mm I.D. flange with 22mm shoulder.
Compatible with most angle grinders, including Bosch, DeWalt, Milwaukee Makita, Black & Decker, Ryobi, Hitachi & more. Recommended operating speed range: 5,000 - 15,000 RPM.
Cleaning: They can be easily cleaned using a torch or a quick few passes with a soft wire brush. The heat will not harm the teeth!