My Store:
Change Store
My Store:
Change Store

Leigh Through Dovetail Bit - 8° Angle 12.7mm Cut Depth

Product Code: LGH-70-8

Tags Leigh
$39 inc GST
In Stock Low Stock Temporarily Out Of Stock Please See Attributes
Buy Quantity Each (inc GST) Price (each) You Save %
Increase value Decrease value
  • Details
  • Specifications

Leigh jigs come standard with a selection of router bits. These are designed for doing joints in commonly used timber, between 12mm and 20mm.

To do dovetails in material outside these thicknesses, an additional dovetail bit it needed, for materials up to 20mm. For materials from 20mm to 32mm, a combination of straight bit and dovetail bit are required.

Most of these bits have 8mm shank, which provide far greater strength than 1/4" shanked bits. There are exceptions to this, these are indicated, and require a large guide bush.

LGH-70-8 can route dovetails into material from 6.35mm to 12.7mm, to be used with LGH-140-8, which is standard with the jig. This has an OD of 9.5mm (3/8").

Brand Leigh
Cut Angle 8°
Cut Angle 8°
Cut Depth 12.7mm
Shank Size 8mm
Straight Bits Required Use Leigh No. LGH-140-8
Diameter 9.5mm (3/8")

Alternatives

$35.00 inc GST (EACH)
Increase value Decrease value
Qty Each (inc GST) Each
$33.00 inc GST (EACH)
Increase value Decrease value
Qty Each (inc GST) Each
$31.90 inc GST (EACH)
Increase value Decrease value
Qty Each (inc GST) Each