The X-PAD applies hold-down and in-line pressure as the clamp tightens. The combined forces keep your workpieces flat and eliminate the need for two or more different clamps.
The V-groove profile gives you two points of contact to clamp. Simply turn the X-PAD™90º to clamp round and oblong-profile stock with a single clamp.
Tricky Glue-Ups
How would you clamp a 3-sided miter - band clamp? Not a chance. The X-PAD™ applies pressure to both sides of the joint, keeping it flat and square, even without a 4th side to support it. Only four Dovetail Clamps upgraded with X-PADs eliminate the need for different types of clamps.
Work-Holding Like A Pro
Securing material without obstructing the top can be a real challenge. This is traditionally done with a combo of bench dogs, in-line clamps, and costly end-vices. MATCHFIT Dovetail Clamps with X-PADs allow you to use spacers to hold your workpiece for any process that requires unrestricted access to the top.
Safer, Cleaner Cuts
The X-PAD's Pressure Transfer Notch gives you more points of contact on the workpiece. This keeps your material firmly in place for safer, cleaner cuts with a table saw sled.
