Kustom Grit Superfine and Microfine Grit 1 and 2 Set

This premium polishing compound is unlike any other available!
Handcrafted in Australia, Kustom Grit Step 1 Superfine Abrasive paste is equivalent to 50,000 Grit, while their Microfine Grit Step 2 is equivalent to 100'000 grit! The ultra-fine abrasive polishing particles are blended into a proprietary base of hard waxes, meaning they can in fact be used as a stand-alone finish for small objects.
However perhaps its best application is its ability to polish out other finishes, removing any remaining swirl marks or scratches and enhancing the depth of the finish while adding additional protection. Use it over oils, shellacs, lacquers, polyurethanes - even brass and other metals; pretty much a universal cutting and polishing compound!
The ultra-fine nature of Kustom Grit also makes it the perfect tool for polishing resins, acrylic and other plastics! At last - a resin polishing paste! Resin casts take on a whole new depth with glass-like shine and clarity, from river table tops to bread boards to jewellery - there is no better way to give your cast the polish it deserves. Pen turners are also now armed with the right tool for polishing out those acrylic blanks to a blemish free gloss. So versatile , you can even use it to polish out your dulled plastic car headlight covers!
Best of all though, unlike other polishing pastes on the market, Kustom Grit contains no harmful nasties, no petro-chemicals, no harsh dissolving bases nor silicon and is therefore environmentally friendly. In fact, it deliberately has no additional scents or colouring agents, meaning it is as non-allergenic and food safe as possible - but it doesnt taste very good, so dont eat it!
This set contains 1 x 170ml Tin of Kustom Grit Step 1 and 1 x 170ml Tin of Kustom Grit Step 2.
How to Use:

After sanding to desired grit, apply Kustom Grit Step 1 with paper towel or cloth to the work piece. Use a cloth or Buffing pad to work the product into the piece
After buffing use a clean piece of paper towel or cloth to wipe any excess Kustom Grit from the work piece before moving onto Kustom Grit Step 2
Apply Kustom Grit Step 2 as per Step 1
For best results sand to the highest grit before using Kustom Grit. For example, 2000 Grit will give a glass like finish. However, great results are achieved anywhere from 400 Grit
Using a powered buffing pad will give the best finish, but Kustom Grit can be applied by hand
Kustom Grit can also be used for Lathe work. Recommended RPM between 400 and 800