Use the Rockler 2-1/4" Interlock Signmaker's Numbering Kit to create signs in Comic Sans font. Position the jigsaw style template letters together and position them on the workpiece and hold them in place using masking tape or double sided tape. Then with a template guide and maximum 9.5mm (3/8") diameter bit (814-095-11) to make signs with the 29 numbers and symbols provided, two of each number and symbols are provided.
A brass guide bush is required (RK-BUSH12).
A plunge router is required, the router is positioned on the templates with the guide bush in one of the letters, switch the router on and plunge it to the already pre-determined depth and route around the letter to create letters 57mm high numbers.
Number & Symbols Kit includes: 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 0, 0, !, @, #, $, ', ?, ., / and &. Requires the use of a plunge router that accepts standard 1-3/16" template guides. Note: Router bit not included.
Staff recommendations:
- Buy two sets of the letter sets, doing signs and being short on a few letters to complete a word or name is frustrating.