Nova Long Nose Jaws - 75mm

The NOVA 6017 75mm (3") Long Nosed Chuck Accessory Jaw Set features a 2" rise above their base which means a very long reach, deep inside bowls. This is a very versatile jaw with tremendous holding power externally and internally. An ideal set for green wood turning.

The internal features dovetail grip for holding footed bowls and other footed work pieces.

EXPANDING GRIP
53.9mm (2.12") – 73mm (2.87")

CONTRACTING GRIP
Square: 49.8mm (1.96") – 29mm (1.14")
Spigot: 59.9mm (2.36") – 39.9mm (1.57")

Actual sizes may vary depending on which NOVA chuck is being used.

This unique long nosed jaws set has a 50mm 2inch rise above their mounting base means very long reach deep inside of bowls.

Features standard on all NOVA Jaws:

Full Cross Function: Only NOVA Chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models. This means all accessory jaws in the range fit all the chucks in the range; including older chuck models; giving you the ultimate flexibility.

In buying a NOVA chuck; you can be confident that whether you want to move up or down the range; any accessories you have invested in will Fit.

Special Dovetail Profile: NOVA chucks have been especially designed so the jaws will cut into the wood; grip firmly in the contraction mode and provide high tear out strength.

Some chucks use an engineering jaw profile (designed to hold a hard material like steel) or rounded profiles; which just crush the wood fibres without digging in and holding securely.